A single asynchronous submersible motor platform engineered across a 100 to 7000 kW power range. 为...而设计 dredging, offshore and deep sea applications. 34 个标准 ratings. 电压s from 380 V to 6000 V. 运行深度 to 300 米.
TKBS 命名编码了我们制造的每台电机的完整配置。 Reading a type code tells you the installation form, the pump connection, the chamber fill, the rated capacity and the pole count,at a glance.
电机优先以预装电缆交付:电缆密封套在工厂密封并测试,无需在甲板上作业。
选择匹配船舶的疏浚几何、泵配置和进入要求。
直接或远程,取决于电机是装在泵上还是通过轴系和齿轮传递扭矩。
腔室内部介质。按深度等级和热工况选择。
潜水作业不容差错。 The motor has to hold a sealing perimeter against seawater, dissipate heat without air cooling, survive vibration from the pump and start hard against load,for years, between teardowns.
Corrosion-resistant welded steel outer shell. All bolts and fasteners in 316L stainless. 为...而设计 continuous seawater contact and long-term submerged storage between deployments.
机械密封作为主级,油封作为次级。通过氟橡胶环和复合材料实现静密封。电缆护套通过专用灌封工艺在终端处密封。
H 级槽绝缘、层间绝缘和浸渍漆,针对高运行温度精选。组装过程中执行完整的防潮工艺。
定子过热、电机腔湿度、油腔湿度、电缆腔湿度和轴承温度,每一项都路由到开关柜保护器和操作员显示。
Automatic pressure balancing devices equalise internal and external pressure. 一型 rated to 35 m, 一型I rated to 300 米 for deep sea sand mining applications.
充分考虑变频谐波和频率变化而设计。适用于软启动、完整变频控制、自耦减压启动或柴油直驱。
Tell us the application, the power, the voltage and the depth. 发送 us a nameplate of the unit you are replacing. We respond with a TKBS 配置, a technical proposal and a delivery commitment.